Difference between revisions of "Broken/Autoconnect"
(restored lost line) |
m (→autoConnect (for the widget on a per channel basis)) |
||
| Line 6: | Line 6: | ||
**Add '''&delay=30''' for heavily visited pages (default is 2) | **Add '''&delay=30''' for heavily visited pages (default is 2) | ||
**Remove all &xxx'''Prompt'''=true parameters (they override autoConnect) | **Remove all &xxx'''Prompt'''=true parameters (they override autoConnect) | ||
| − | ** | + | **You must have '''&settings=<yourManagerID>''' |
*Switching autoconnect: | *Switching autoconnect: | ||
| − | ** | + | **Join #yourChannel using the '''mibbit client''' |
**Make yourself '''op''' (or higher). | **Make yourself '''op''' (or higher). | ||
**Use the command "'''/autoconnect on''' (or off)" (only needed '''once''', the setting is stored in a db, if you use the full client it will take effect after ten minutes) | **Use the command "'''/autoconnect on''' (or off)" (only needed '''once''', the setting is stored in a db, if you use the full client it will take effect after ten minutes) | ||
Revision as of 17:10, 21 November 2009
autoConnect (for the widget on a per channel basis)
- Modify the Uri_parameters for your widget:
- Add &autoConnect=true
- Add &delay=30 for heavily visited pages (default is 2)
- Remove all &xxxPrompt=true parameters (they override autoConnect)
- You must have &settings=<yourManagerID>
- Switching autoconnect:
- Join #yourChannel using the mibbit client
- Make yourself op (or higher).
- Use the command "/autoconnect on (or off)" (only needed once, the setting is stored in a db, if you use the full client it will take effect after ten minutes)
Auto-connect for the main client is done in the "Channels" tab, see: Autoidentify
