Difference between revisions of "Broken/Autoconnect"
(→autoConnect (for the widget on a per channel basis): removed .net note) |
(→autoConnect (for the widget on a per channel basis): broken down to all needed steps) |
||
| Line 2: | Line 2: | ||
==autoConnect (for the widget on a per channel basis)== | ==autoConnect (for the widget on a per channel basis)== | ||
| − | * | + | *Modify the [[Uri_parameters]] for your widget: |
| − | + | **Add '''&autoConnect=true''' | |
| − | *Remove all & | + | **Remove all &xxx'''Prompt'''=true parameters (they override autoConnect) |
| + | *Switching autoconnect: | ||
| + | **Goto your room using the '''mibbit client''' | ||
| + | **Make yourself '''op''' (or higher). | ||
| + | **Use the command "'''/autoconnect on''' (or off)" (only needed '''once''', the setting is stored in a db, if you use the full client it will take effect after one hour) | ||
---- | ---- | ||
Revision as of 11:25, 23 July 2009
autoConnect (for the widget on a per channel basis)
- Modify the Uri_parameters for your widget:
- Add &autoConnect=true
- Remove all &xxxPrompt=true parameters (they override autoConnect)
- Switching autoconnect:
- Goto your room using the mibbit client
- Make yourself op (or higher).
- Use the command "/autoconnect on (or off)" (only needed once, the setting is stored in a db, if you use the full client it will take effect after one hour)
Auto-connect for the main client is done in the "Channels" tab, see: Autoidentify
