Difference between revisions of "Broken/Autoconnect"

From Mibbit Wiki
Jump to: navigation, search
(restored lost line)
m (autoConnect (for the widget on a per channel basis))
Line 6: Line 6:
 
**Add '''&delay=30''' for heavily visited pages (default is 2)
 
**Add '''&delay=30''' for heavily visited pages (default is 2)
 
**Remove all &xxx'''Prompt'''=true parameters (they override autoConnect)
 
**Remove all &xxx'''Prompt'''=true parameters (they override autoConnect)
**you must have '''&settings=<yourManagerID>'''
+
**You must have '''&settings=<yourManagerID>'''
  
 
*Switching autoconnect:
 
*Switching autoconnect:
**join #yourChannel using the '''mibbit client'''
+
**Join #yourChannel using the '''mibbit client'''
 
**Make yourself '''op''' (or higher).  
 
**Make yourself '''op''' (or higher).  
 
**Use the command "'''/autoconnect on''' (or off)" (only needed '''once''', the setting is stored in a db, if you use the full client it will take effect after ten minutes)
 
**Use the command "'''/autoconnect on''' (or off)" (only needed '''once''', the setting is stored in a db, if you use the full client it will take effect after ten minutes)

Revision as of 17:10, 21 November 2009

API | URI Parameters | Auto Connect


autoConnect (for the widget on a per channel basis)

  • Modify the Uri_parameters for your widget:
    • Add &autoConnect=true
    • Add &delay=30 for heavily visited pages (default is 2)
    • Remove all &xxxPrompt=true parameters (they override autoConnect)
    • You must have &settings=<yourManagerID>
  • Switching autoconnect:
    • Join #yourChannel using the mibbit client
    • Make yourself op (or higher).
    • Use the command "/autoconnect on (or off)" (only needed once, the setting is stored in a db, if you use the full client it will take effect after ten minutes)

Auto-connect for the main client is done in the "Channels" tab, see: Autoidentify