IRC services

From Mibbit Wiki
Revision as of 02:57, 16 February 2010 by Kitsune (Talk | contribs) (EXPIRES)

Jump to: navigation, search

This page was designed to show and explain the commands that our IRC services support, there are detailed sections on NickServ ChanServ and MemoServ.

For further support with our IRC services or for password-related problems please contact a Services Administrator in our IRC help channel.

IRC services are powered by Anope.

NickServ

HELP

NickServ allows you to "register" a nickname and
prevent others from using it. The following
commands allow for registration and maintenance of
nicknames; to use them, type /msg NickServ command.
For more information on a specific command, type
/msg NickServ HELP command.

    REGISTER   Register a nickname
    GROUP      Join a group
    IDENTIFY   Identify yourself with your password
    ACCESS     Modify the list of authorized addresses
    SET        Set options, including kill protection
    DROP       Cancel the registration of a nickname
    RECOVER    Kill another user who has taken your nick
    RELEASE    Regain custody of your nick after RECOVER
    SENDPASS   Forgot your password? Try this

Other commands: GHOST, ALIST, GLIST, INFO, LIST, LOGOUT,
                STATUS, UPDATE

NOTICE: This service is intended to provide a way for
IRC users to ensure their identity is not compromised.
It is NOT intended to facilitate "stealing" of
nicknames or other malicious actions.  Abuse of NickServ
will result in, at minimum, loss of the abused
nickname(s).

REGISTER

Syntax: /msg NickServ REGISTER password [email]

Registers your nickname in the NickServ database.  Once
your nick is registered, you can use the SET and ACCESS
commands to configure your nick's settings as you like
them.  Make sure you remember the password you use when
registering - you'll need it to make changes to your nick
later.  (Note that case matters!  ANOPE, Anope, and
anope are all different passwords!)

Guidelines on choosing passwords:

Passwords should not be easily guessable.  For example,
using your real name as a password is a bad idea.  Using
your nickname as a password is a much worse idea ;) and,
in fact, NickServ will not allow it.  Also, short
passwords are vulnerable to trial-and-error searches, so
you should choose a password at least 5 characters long.
Finally, the space character cannot be used in passwords.

The parameter email is optional and will set the email
for your nick immediately. However, it may be required
on certain networks.
Your privacy is respected; this e-mail won't be given to
any third-party person.

This command also creates a new group for your nickname,
that will allow you to register other nicks later sharing
the same configuration, the same set of memos and the
same channel privileges. For more information on this
feature, type /msg NickServ HELP GROUP.

GROUP

Syntax: /msg NickServ GROUP target password

This command makes your nickname join the target nickname's
group. password is the password of the target nickname.

Joining a group will allow you to share your configuration,
memos, and channel priviledges with all the nicknames in the
group, and much more!

A group exists as long as it is useful. This means that even
if a nick of the group is dropped, you won't lose the
shared things described above, as long as there is at
least one nick remaining in the group.

You can use this command even if you have not registered
your nick yet. If your nick is already registered, you'll
need to identify yourself before using this command. Type
/msg NickServ HELP IDENTIFY for more information. This
last may be not possible on your IRC network.

It is recommended to use this command with a non-registered
nick because it will be registered automatically when
using this command. You may use it with a registered nick (to
change your group) only if your network administrators allowed
it.

You can only be in one group at a time. Group merging is
not possible.

Note: all the nicknames of a group have the same password.

IDENTIFY

Syntax: /msg NickServ IDENTIFY password

Tells NickServ that you are really the owner of this
nick.  Many commands require you to authenticate yourself
with this command before you use them.  The password
should be the same one you sent with the REGISTER
command.

LOGOUT

Syntax: /msg NickServ LOGOUT

This reverses the effect of the IDENTIFY command, i.e.
make you not recognized as the real owner of the nick
anymore. Note, however, that you won't be asked to reidentify
yourself.

DROP

Syntax: /msg NickServ DROP [nickname]

Drops your nickname from the NickServ database.  A nick
that has been dropped is free for anyone to re-register.

You may drop a nick within your group by passing it
as the nick parameter.

In order to use this command, you must first identify
with your password (/msg NickServ HELP IDENTIFY for more
information).

ACCESS

Syntax: /msg NickServ ACCESS ADD mask
        ACCESS DEL mask
        ACCESS LIST

Modifies or displays the access list for your nick.  This
is the list of addresses which will be automatically
recognized by NickServ as allowed to use the nick.  If
you want to use the nick from a different address, you
need to send an IDENTIFY command to make NickServ
recognize you.

Examples:

    ACCESS ADD anyone@*.bepeg.com
        Allows access to user anyone from any machine in
        the bepeg.com domain.

    ACCESS DEL anyone@*.bepeg.com
        Reverses the previous command.

    ACCESS LIST
        Displays the current access list.

SET

Syntax: /msg NickServ SET option parameters

Sets various nickname options.  option can be one of:

    DISPLAY    Set the display of your group in Services
    PASSWORD   Set your nickname password
    LANGUAGE   Set the language Services will use when
                   sending messages to you
    URL        Associate a URL with your nickname
    EMAIL      Associate an E-mail address with your nickname
    ICQ        Associate an ICQ number with your nickname
    GREET      Associate a greet message with your nickname
    KILL       Turn protection on or off
    SECURE     Turn nickname security on or off
    PRIVATE    Prevent your nickname from appearing in a
                   /msg NickServ LIST
    HIDE       Hide certain pieces of nickname information
    MSG        Change the communication method of Services

In order to use this command, you must first identify
with your password (/msg NickServ HELP IDENTIFY for more
information).

Type /msg NickServ HELP SET option for more information
on a specific option.

SET DISPLAY

Syntax: /msg NickServ SET DISPLAY new-display

Changes the display used to refer to your nickname group in
Services. The new display MUST be a nick of your group.

SET PASSWORD

Syntax: /msg NickServ SET PASSWORD new-password

Changes the password used to identify you as the nick's
owner.

SET LANGUAGE

Syntax: /msg NickServ SET LANGUAGE number

Changes the language Services uses when sending messages to
you (for example, when responding to a command you send).
number should be chosen from the following list of
supported languages:

SET URL

Syntax: /msg NickServ SET URL url

Associates the given URL with your nickname.  This URL
will be displayed whenever someone requests information
on your nick with the INFO command.

SET EMAIL

Syntax: /msg NickServ SET EMAIL address

Associates the given E-mail address with your nickname.
This address will be displayed whenever someone requests
information on the channel with the INFO command.

SET HIDE

Syntax: /msg NickServ SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}

Allows you to prevent certain pieces of information from
being displayed when someone does a NickServ INFO on your
nick.  You can hide your E-mail address (EMAIL), last seen
user@host mask (USERMASK), your services access status
(STATUS) and  last quit message (QUIT).
The second parameter specifies whether the information should
be displayed (OFF) or hidden (ON).

SET ICQ

Syntax: /msg NickServ SET ICQ number

Associates the given ICQ number with your nickname.  This
number will be displayed whenever someone requests
information on your nick with the INFO command.

SET GREET

Syntax: /msg NickServ SET GREET message

Makes the given message the greet of your nickname, that
will be displayed when joining a channel that has GREET
option enabled, provided that you have the necessary
access on it.

SET KILL

Syntax: /msg NickServ SET KILL {ON | QUICK | IMMED | OFF}

Turns the automatic protection option for your nick
on or off.  With protection on, if another user
tries to take your nick, they will be given one minute to
change to another nick, after which NickServ will forcibly change
their nick.

If you select QUICK, the user will be given only 20 seconds
to change nicks instead of the usual 60.  If you select
IMMED, user's nick will be changed immediately without being
warned first or given a chance to change their nick; please
do not use this option unless necessary.  Also, your
network's administrators may have disabled this option.

SET SECURE

Syntax: /msg NickServ SET SECURE {ON | OFF}

Turns NickServ's security features on or off for your
nick.  With SECURE set, you must enter your password
before you will be recognized as the owner of the nick,
regardless of whether your address is on the access
list.  However, if you are on the access list, NickServ
will not auto-kill you regardless of the setting of the
KILL option.

SET PRIVATE

Syntax: /msg NickServ SET PRIVATE {ON | OFF}

Turns NickServ's privacy option on or off for your nick.
With PRIVATE set, your nickname will not appear in
nickname lists generated with NickServ's LIST command.
(However, anyone who knows your nickname can still get
information on it using the INFO command.)

SET HIDE

Syntax: /msg NickServ SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}

Allows you to prevent certain pieces of information from
being displayed when someone does a NickServ INFO on your
nick.  You can hide your E-mail address (EMAIL), last seen
user@host mask (USERMASK), your services access status
(STATUS) and  last quit message (QUIT).
The second parameter specifies whether the information should
be displayed (OFF) or hidden (ON).

SET MSG

Syntax: /msg NickServ SET MSG {ON | OFF}

Allows you to choose the way Services are communicating with
you. With MSG set, Services will use messages, else they'll
use notices.

UPDATE

Syntax: /msg NickServ UPDATE
Updates your current status, i.e. it checks for new memos,
sets needed chanmodes (ModeonID) and updates your vhost and
your userflags (lastseentime, etc).

RECOVER

Syntax: /msg NickServ RECOVER nickname [password]

Allows you to recover your nickname if someone else has
taken it; this does the same thing that NickServ does
automatically if someone tries to use a kill-protected
nick.

When you give this command, NickServ will bring a fake
user online with the same nickname as the user you're
trying to recover your nick from.  This causes the IRC
servers to disconnect the other user.  This fake user will
will remain online for one minute to ensure that the other
user does not immediately reconnect; after that minute, you
can reclaim your nick.  Alternatively, use the RELEASE
command (/msg NickServ HELP RELEASE) to get the nick
back sooner.

In order to use the RECOVER command for a nick, your
current address as shown in /WHOIS must be on that nick's
access list, you must be identified and in the group of
that nick, or you must supply the correct password for
the nickname.

RELEASE

Syntax: /msg NickServ RELEASE nickname [password]

Instructs NickServ to remove any hold on your nickname
caused by automatic kill protection or use of the RECOVER
command.  By default, such holds last for one minute;
this command gets rid of them sooner.

In order to use the RELEASE command for a nick, your
current address as shown in /WHOIS must be on that nick's
access list, you must be identified and in the group of
that nick, or you must supply the correct password for
the nickname.

GHOST

Syntax: /msg NickServ GHOST nickname [password]

Terminates a "ghost" IRC session using your nick.  A
"ghost" session is one which is not actually connected,
but which the IRC server believes is still online for one
reason or another.  Typically, this happens if your
computer crashes or your Internet or modem connection
goes down while you're on IRC.

In order to use the GHOST command for a nick, your
current address as shown in /WHOIS must be on that nick's
access list, you must be identified and in the group of
that nick, or you must supply the correct password for
the nickname.

INFO

Syntax: /msg NickServ INFO nickname [ALL]

Displays information about the given nickname, such as
the nick's owner, last seen address and time, and nick
options. If you are identified for the nick you're
getting information for and ALL is specified, you will
be shown all the information; regardless of whether
it's hidden or not.

LIST

Syntax: /msg NickServ LIST pattern

Lists all registered nicknames which match the given
pattern, in nick!user@host format.  Nicks with the
PRIVATE option set will not be displayed.

Examples:

    LIST "*!
joeuser@foo.com"
        Lists all nicks owned by 
joeuser@foo.com.

    LIST "*Bot*!*@*"
        Lists all registered nicks with Bot in their
        names (case insensitive).

    LIST "*!*@*.bar.org"
        Lists all nicks owned by users in the bar.org
        domain.

ALIST

Syntax: /msg NickServ ALIST [level]

Lists all channels you have access on. Optionally, you can specify
a level in XOP or ACCESS format. The resulting list will only
include channels where you have the given level of access.
Examples:
    ALIST Founder
        Lists all channels where you have Founder
        access.
    ALIST AOP
        Lists all channels where you have AOP
        access or greater.
    ALIST 10
        Lists all channels where you have level 10
        access or greater.
Channels that have the NOEXPIRE option set will be
prefixed by an exclamation mark.

GLIST

Syntax: /msg NickServ GLIST

Lists all nicks in your group.

STATUS

Syntax: /msg NickServ STATUS nickname...

Returns whether the user using the given nickname is
recognized as the owner of the nickname.  The response has
this format:

    nickname status-code

where nickname is the nickname sent with the command, and
status-code is one of the following:

    0 - no such user online or nickname not registered
    1 - user not recognized as nickname's owner
    2 - user recognized as owner via access list only
    3 - user recognized as owner via password identification

Up to sixteen nicknames may be sent with each command; the
rest will be ignored. If no nickname is given, your status
will be returned.

SENDPASS

Syntax: /msg NickServ SENDPASS nickname

Send the password of the given nickname to the e-mail address
set in the nickname record. This command is really useful
to deal with lost passwords.

May be limited to IRC operators on certain networks.

This command is unavailable when encryption is enabled.

EXPIRES

Nicknames that are not used anymore are subject to
the automatic expiration, i.e. they will be deleted
after 35 days if not used.

SERVADMIN

SERVADMIN HELP

The following commands are available to Services admins:

    GETPASS    Retrieve the password for a nickname
                   (only if encryption is disabled)
    GETEMAIL   Matches and returns all users that
                   registered using given email
    FORBID     Prevents a nickname from being registered

Services admins can also drop any nickname without needing
to identify for the nick, and may view the access list for
any nickname (/msg NickServ ACCESS LIST nick).

SERVADMIN LOGOUT

Syntax: /msg NickServ LOGOUT [nickname [REVALIDATE]]

Without a parameter, reverses the effect of the IDENTIFY
command, i.e. make you not recognized as the real owner of the nick
anymore. Note, however, that you won't be asked to reidentify
yourself.

With a parameter, does the same for the given nick. If you
specify REVALIDATE as well, Services will ask the given nick
to re-identify. This use limited to Services admins.

SERVADMIN DROP

Syntax: /msg NickServ DROP [nickname]

Without a parameter, drops your nickname from the
NickServ database.

With a parameter, drops the named nick from the database.
You may drop any nick within your group without any
special privileges. Dropping any nick is limited to
Services admins.

SERVADMIN SET

Services admins can also set the option NOEXPIRE, with
which nicknames can be prevented from expiring.
Additionally, Services admins can set options for any
nickname without entering a password, using the format
SET nickname option parameters.

SERVADMIN SET NOEXPIRE

Syntax: /msg NickServ SET [nickname] NOEXPIRE {ON | OFF}

Sets whether the given nickname will expire.  Setting this
to ON prevents the nickname from expiring.  If no
nickname is given, sets the no-expire flag for your nick.

Limited to Services admins.

SERVADMIN LIST

Syntax: /msg NickServ LIST pattern [FORBIDDEN] [NOEXPIRE] [UNCONFIRMED]

Lists all registered nicknames which match the given
pattern, in nick!user@host format.  Nicks with the PRIVATE
option set will only be displayed to Services admins.  Nicks
with the NOEXPIRE option set will have a ! appended to the
nickname for Services admins.

If the FORBIDDEN, NOEXPIRE or UNCONFIRMED options are given, only
nicks which, respectively, are FORBIDden, UNCONFIRMED or have the
NOEXPIRE flag set will be displayed. If all three options are
given, all three types of nicks will be displayed. These options
are limited to Services admins.
Examples:

    LIST *!
joeuser@foo.com
        Lists all registered nicks owned by 
joeuser@foo.com.

    LIST *Bot*!*@*
        Lists all registered nicks with Bot in their
        names (case insensitive).

    LIST * NOEXPIRE
        Lists all registered nicks which have been set to
        not expire.

SERVADMIN ALIST

Syntax: /msg NickServ ALIST [nickname] [level]

With no parameters, lists channels you have access on. With
one parameter, lists channels that nickname has access
on. With two parameters lists channels that nickname has
level access or greater on.
This use limited to Services admins.

SERVADMIN GLIST

Syntax: /msg NickServ GLIST [nickname]

Without a parameter, lists all nicknames that are in
your group.

With a parameter, lists all nicknames that are in the
group of the given nick.
This use limited to Services admins.

SERVADMIN GETPASS

Syntax: /msg NickServ GETPASS nickname

Returns the password for the given nickname.  Note that
whenever this command is used, a message including the
person who issued the command and the nickname it was used
on will be logged and sent out as a WALLOPS/GLOBOPS.

Limited to Services admins.

This command is unavailable when encryption is enabled.

SERVADMIN FORBID

Syntax: /msg NickServ FORBID nickname [reason]

Disallows a nickname from being registered or used by
anyone.  May be cancelled by dropping the nick.

On certain networks, reason is required.

Limited to Services admins.

SERVADMIN INFO

Services admins may use the ALL parameter with any nick.

ChanServ

HELP

ChanServ allows you to register and control various
aspects of channels.  ChanServ can often prevent
malicious users from "taking over" channels by limiting
who is allowed channel operator privileges.  Available
commands are listed below; to use them, type
/msg ChanServ command.  For more information on a
specific command, type /msg ChanServ HELP command.

    REGISTER   Register a channel
    IDENTIFY   Identify yourself with your password
    SET        Set channel options and information
    AOP        Modify the list of AOP users
    SOP        Modify the list of SOP users
    ACCESS     Modify the list of privileged users
    LEVELS     Redefine the meanings of access levels
    AKICK      Maintain the AutoKick list
    DROP       Cancel the registration of a channel
    SENDPASS   Help retrieve lost passwords

Other commands: BAN, CLEAR, DEOP, DEVOICE, GETKEY, INFO,
                INVITE, KICK, LIST, LOGOUT, OP, TOPIC,
                UNBAN, VOICE, VOP

UNREAL

These commands are also available on this network:
    DEHALFOP, DEOWNER, DEPROTECT, HALFOP, HOP, OWNER,
    PROTECT

EXPIRES

Note that any channel which is not used for 28 days
(i.e. which no user on the channel's access list enters
for that period of time) will be automatically dropped.

REGISTER

Syntax: /msg ChanServ REGISTER channel password description

Registers a channel in the ChanServ database.  In order
to use this command, you must first be a channel operator
on the channel you're trying to register.  The password
is used with the IDENTIFY command to allow others to
make changes to the channel settings at a later time.
The last parameter, which must be included, is a
general description of the channel's purpose.

When you register a channel, you are recorded as the
"founder" of the channel.  The channel founder is allowed
to change all of the channel settings for the channel;
ChanServ will also automatically give the founder
channel-operator privileges when s/he enters the channel.
See the ACCESS command (/msg ChanServ HELP ACCESS) for
information on giving a subset of these privileges to
other channel users.

NOTICE: In order to register a channel, you must have
first registered your nickname.  If you haven't,
/msg ChanServ HELP for information on how to do so.

IDENTIFY

Syntax: /msg ChanServ IDENTIFY channel password

Authenticates you to ChanServ as the founder of the given
channel.  Many commands require you to use this command
before using them.  The password should be the same one
you sent with the REGISTER command.

LOGOUT

Syntax: /msg ChanServ LOGOUT channel nickname

This command will log the selected nickname out meaning they
would have to reidentify themselves to regain their access.

If you are the founder of the channel, you can log out anybody,
else you can only log out yourself.

DROP

Syntax: /msg ChanServ DROP channel

Unregisters the named channel.  Can only be used by
channel founder, who must use the IDENTIFY command first.

SET

Syntax: /msg ChanServ SET channel option parameters

Allows the channel founder to set various channel options
and other information.

Available options:

    FOUNDER       Set the founder of a channel
    SUCCESSOR     Set the successor for a channel
    PASSWORD      Set the founder password
    DESC          Set the channel description
    URL           Associate a URL with the channel
    EMAIL         Associate an E-mail address with the channel
    ENTRYMSG      Set a message to be sent to users when they
                     enter the channel
    BANTYPE       Set how Services make bans on the channel
    MLOCK         Lock channel modes on or off
    KEEPTOPIC     Retain topic when channel is not in use
    OPNOTICE      Send a notice when OP/DEOP commands are used
    PEACE         Regulate the use of critical commands
    PRIVATE       Hide channel from LIST command
    RESTRICTED    Restrict access to the channel
    SECURE        Activate ChanServ security features
    SECUREOPS     Stricter control of chanop status
    SECUREFOUNDER Stricter control of channel founder status
    SIGNKICK      Sign kicks that are done with KICK command
    TOPICLOCK     Topic can only be changed with TOPIC
    XOP           Toggle the user privilege system

Type /msg ChanServ HELP SET option for more information on a
particular option.

SET FOUNDER

Syntax: /msg ChanServ SET channel FOUNDER nick

Changes the founder of a channel.  The new nickname must
be a registered one.

SET SUCCESSOR

Syntax: /msg ChanServ SET channel SUCCESSOR nick

Changes the successor of a channel.  If the founder's
nickname expires or is dropped while the channel is still
registered, the successor will become the new founder of the
channel.  However, if the successor already has too many
channels registered (), the channel will be dropped
instead, just as if no successor had been set.  The new
nickname must be a registered one.

SET PASSWORD

Syntax: /msg ChanServ SET channel PASSWORD password

Sets the password used to identify as the founder of the
channel.

SET DESC

Syntax: /msg ChanServ SET channel DESC description

Sets the description for the channel, which shows up with
the LIST and INFO commands.

SET URL

Syntax: /msg ChanServ SET channel URL [url]

Associates the given URL with the channel.  This URL will
be displayed whenever someone requests information on the
channel with the INFO command.  If no parameter is given,
deletes any current URL for the channel.

SET EMAIL

Syntax: /msg ChanServ SET channel EMAIL [address]

Associates the given E-mail address with the channel.
This address will be displayed whenever someone requests
information on the channel with the INFO command.  If no
parameter is given, deletes any current E-mail address for
the channel.

SET ENTRYMSG

Syntax: /msg ChanServ SET channel ENTRYMSG [message]

Sets the message which will be sent via /notice to users
when they enter the channel.  If no parameter is given,
causes no message to be sent upon entering the channel.

SET BANTYPE

Syntax: /msg ChanServ SET channel BANTYPE bantype

Sets the ban type that will be used by services whenever
they need to ban someone from your channel.

bantype is a number between 0 and 3 that means:

0: ban in the form *!user@host
1: ban in the form *!*user@host
2: ban in the form *!*@host
3: ban in the form *!*user@*.domain

SET KEEPTOPIC

Syntax: /msg ChanServ SET channel KEEPTOPIC {ON | OFF}

Enables or disables the topic retention option for a
channel.  When topic retention is set, the topic for the
channel will be remembered by ChanServ even after the
last user leaves the channel, and will be restored the
next time the channel is created.

SET TOPICLOCK

Syntax: /msg ChanServ SET channel TOPICLOCK {ON | OFF}

Enables or disables the topic lock option for a channel.
When topic lock is set, ChanServ will not allow the
channel topic to be changed except via the TOPIC
command.

SET MLOCK

Syntax: /msg ChanServ SET channel MLOCK modes

Sets the mode-lock parameter for the channel. ChanServ
allows you to define certain channel modes to be always
on, off or free to be either on or off.

The modes parameter is constructed exactly the same way
as a /MODE command; that is, modes followed by a + are
locked on, and modes followed by a - are locked off. Note,
however, that unlike the /MODE command, each use of
SET MLOCK will remove all modes previously locked before
setting the new!

Warning:  If you set a mode-locked key, as in the second
example below, you should also set the RESTRICTED option for
the channel (see HELP SET RESTRICTED), or anyone entering
the channel when it is empty will be able to see the key!

Examples:

    SET #channel MLOCK +nt-iklps
        Forces modes n and t on, and modes i, k, l, p, and
        s off.  Mode m is left free to be either on or off.

    SET #channel MLOCK +knst-ilmp my-key
        Forces modes k, n, s, and t on, and modes i, l, m,
        and p off.  Also forces the channel key to be
        "my-key".

    SET #channel MLOCK +
        Removes the mode lock; all channel modes are free
        to be either on or off.

SET PEACE

Syntax: /msg ChanServ SET channel PEACE {ON | OFF}

Enables or disables the peace option for a channel.
When peace is set, an user won't be able to kick,
ban or remove a channel status of an user that has
a level superior or equal to his via ChanServ commands.

SET PRIVATE

Syntax: /msg ChanServ SET channel PRIVATE {ON | OFF}

Enables or disables the private option for a channel.
When private is set, a /msg ChanServ LIST will not
include the channel in any lists.

SET RESTRICTED

Syntax: /msg ChanServ SET channel RESTRICTED {ON | OFF}

Enables or disables the restricted access option for a
channel.  When restricted access is set, users who would
normally be disallowed from having channel operator
privileges (users with negative access levels and, if
secure ops is set, users not on the access list) will
instead be kicked and banned from the channel.

SET SECURE

Syntax: /msg ChanServ SET channel SECURE {ON | OFF}

Enables or disables ChanServ's security features for a
channel.  When SECURE is set, only users who have
registered their nicknames with ChanServ and IDENTIFY'd
with their password will be given access to the channel
as controlled by the access list.

SET SECUREOPS

Syntax: /msg ChanServ SET channel SECUREOPS {ON | OFF}

Enables or disables the secure ops option for a channel.
When secure ops is set, users who are not on the userlist
will not be allowed chanop status.

SET SECUREFOUNDER

Syntax: /msg ChanServ SET channel SECUREFOUNDER {ON | OFF}

Enables or disables the secure founder option for a channel.
When secure founder is set, only the real founder will be
able to drop the channel, change its password, its founder and its
successor, and not those who are IDENTIFY'd with ChanServ.

SET SIGNKICK

Syntax: /msg ChanServ SET channel SIGNKICK {ON | LEVEL | OFF}

Enables or disables signed kicks for a
channel.  When SIGNKICK is set, kicks issued with
ChanServ KICK command will have the nick that used the
command in their reason.

If you use LEVEL, those who have a level that is superior
or equal to the SIGNKICK level on the channel won't have their
kicks signed. See /msg ChanServ HELP LEVELS for more information.

SET XOP

Syntax: /msg ChanServ SET channel XOP {ON | OFF}

Enables or disables the xOP lists system for a channel.
When XOP is set, you have to use the AOP/SOP/VOP
commands in order to give channel privileges to
users, else you have to use the ACCESS command.

Technical Note: when you switch from access list to xOP
lists system, your level definitions and user levels will be
changed, so you won't find the same values if you
switch back to access system!

You should also check that your users are in the good xOP
list after the switch from access to xOP lists, because the
guess is not always perfect... in fact, it is not recommended
to use the xOP lists if you changed level definitions with
the LEVELS command.

Switching from xOP lists system to access list system
causes no problem though.

SET OPNOTICE

Syntax: /msg ChanServ SET channel OPNOTICE {ON | OFF}

Enables or disables the op-notice option for a channel.
When op-notice is set, ChanServ will send a notice to the
channel whenever the OP or DEOP commands are used for a user
in the channel.

AOP

Syntax: /msg ChanServ AOP channel ADD nick
        AOP channel DEL {nick | entry-num | list}
        AOP channel LIST [mask | list]
        AOP channel CLEAR

Maintains the AOP (AutoOP) list for a channel. The AOP
list gives users the right to be auto-opped on your channel,
to unban or invite themselves if needed, to have their
greet message showed on join, and so on.

The AOP ADD command adds the given nickname to the
AOP list.

The AOP DEL command removes the given nick from the
AOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The AOP LIST command displays the AOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:
   AOP #channel LIST 2-5,7-9
      Lists AOP entries numbered 2 through 5 and
      7 through 9.

The AOP CLEAR command clears all entries of the
AOP list.

The AOP ADD and AOP DEL commands are limited to
SOPs or above, while the AOP CLEAR command can only
be used by the channel founder. However, any user on the
AOP list may use the AOP LIST command.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

HOP

Syntax: /msg ChanServ HOP channel ADD nick
        HOP channel DEL {nick | entry-num | list}
        HOP channel LIST [mask | list]
        HOP channel CLEAR

Maintains the HOP (HalfOP) list for a channel. The HOP
list gives users the right to be auto-halfopped on your
channel.

The HOP ADD command adds the given nickname to the
HOP list.

The HOP DEL command removes the given nick from the
HOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The HOP LIST command displays the HOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:
   HOP #channel LIST 2-5,7-9
      Lists HOP entries numbered 2 through 5 and
      7 through 9.

The HOP CLEAR command clears all entries of the
HOP list.

The HOP ADD, HOP DEL and HOP LIST commands are
limited to AOPs or above, while the HOP CLEAR command
can only be used by the channel founder.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

SOP

Syntax: /msg ChanServ SOP channel ADD nick
        SOP channel DEL {nick | entry-num | list}
        SOP channel LIST [mask | list]
        SOP channel CLEAR

Maintains the SOP (SuperOP) list for a channel. The SOP
list gives users all rights given by the AOP list, and adds
those needed to use the AutoKick and the BadWords lists,
to send and read channel memos, and so on.

The SOP ADD command adds the given nickname to the
SOP list.

The SOP DEL command removes the given nick from the
SOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The SOP LIST command displays the SOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:
   SOP #channel LIST 2-5,7-9
      Lists AOP entries numbered 2 through 5 and
      7 through 9.

The SOP CLEAR command clears all entries of the
SOP list.

The SOP ADD, SOP DEL and SOP CLEAR commands are
limited to the channel founder. However, any user on the
AOP list may use the SOP LIST command.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

VOP

Syntax: /msg ChanServ VOP channel ADD nick
        VOP channel DEL {nick | entry-num | list}
        VOP channel LIST [mask | list]
        VOP channel CLEAR

Maintains the VOP (VOicePeople) list for a channel.
The VOP list allows users to be auto-voiced and to voice
themselves if they aren't.

The VOP ADD command adds the given nickname to the
VOP list.

The VOP DEL command removes the given nick from the
VOP list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The VOP LIST command displays the VOP list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:
   VOP #channel LIST 2-5,7-9
      Lists VOP entries numbered 2 through 5 and
      7 through 9.

The VOP CLEAR command clears all entries of the
VOP list.

The VOP ADD, VOP DEL and VOP LIST commands are
limited to AOPs or above, while the VOP CLEAR command
can only be used by the channel founder.

This command may have been disabled for your channel, and
in that case you need to use the access list. See
/msg ChanServ HELP ACCESS for information about the access list,
and /msg ChanServ HELP SET XOP to know how to toggle between
the access list and xOP list systems.

ACCESS

Syntax: /msg ChanServ ACCESS channel ADD nick level
        ACCESS channel DEL {nick | entry-num | list}
        ACCESS channel LIST [mask | list]
        ACCESS channel CLEAR

Maintains the access list for a channel.  The access
list specifies which users are allowed chanop status or
access to ChanServ commands on the channel.  Different
user levels allow for access to different subsets of
privileges; /msg ChanServ HELP ACCESS LEVELS for more
specific information.  Any nick not on the access list has
a user level of 0.

The ACCESS ADD command adds the given nickname to the
access list with the given user level; if the nick is
already present on the list, its access level is changed to
the level specified in the command.  The level specified
must be less than that of the user giving the command, and
if the nick is already on the access list, the current
access level of that nick must be less than the access level
of the user giving the command.

The ACCESS DEL command removes the given nick from the
access list.  If a list of entry numbers is given, those
entries are deleted.  (See the example for LIST below.)

The ACCESS LIST command displays the access list.  If
a wildcard mask is given, only those entries matching the
mask are displayed.  If a list of entry numbers is given,
only those entries are shown; for example:
   ACCESS #channel LIST 2-5,7-9
      Lists access entries numbered 2 through 5 and
      7 through 9.

The ACCESS CLEAR command clears all entries of the
access list.

ACCESS LEVELS

User access levels

By default, the following access levels are defined:

   Founder   Full access to ChanServ functions; automatic
                     opping upon entering channel.  Note
                     that only one person may have founder
                     status (it cannot be given using the
                     ACCESS command).
        10   Access to AKICK command; automatic opping.
         5   Automatic opping.
         3   Automatic voicing.
         0   No special privileges; can be opped by other
                     ops (unless secure-ops is set).
        <0   May not be opped.

These levels may be changed, or new ones added, using the
LEVELS command; type /msg ChanServ HELP LEVELS for
information.

AKICK

Syntax: /msg ChanServ AKICK channel ADD mask [reason]
        AKICK channel STICK mask
        AKICK channel UNSTICK mask
        AKICK channel DEL mask
        AKICK channel LIST [mask]
        AKICK channel VIEW [mask]
        AKICK channel ENFORCE
        AKICK channel CLEAR

Maintains the AutoKick list for a channel.  If a user
on the AutoKick list attempts to join the channel,
ChanServ will ban that user from the channel, then kick
the user.

The AKICK ADD command adds the given nick or usermask
to the AutoKick list.  If a reason is given with
the command, that reason will be used when the user is
kicked; if not, the default reason is "You have been
banned from the channel".

The AKICK STICK command permanently bans the given mask
on the channel. If someone tries to remove the ban, ChanServ
will automatically set it again. You can't use it for
registered nicks.

The AKICK UNSTICK command cancels the effect of the
AKICK STICK command, so you'll be able to unset the
ban again on the channel.

The AKICK DEL command removes the given nick or mask
from the AutoKick list.  It does not, however, remove any
bans placed by an AutoKick; those must be removed
manually.

The AKICK LIST command displays the AutoKick list, or
optionally only those AutoKick entries which match the
given mask.

The AKICK VIEW command is a more verbose version of
AKICK LIST command.

The AKICK ENFORCE command causes ChanServ to enforce the
current AKICK list by removing those users who match an
AKICK mask.

The AKICK CLEAR command clears all entries of the
akick list.

LEVELS

Syntax: /msg ChanServ LEVELS channel SET type level
        LEVELS channel {DIS | DISABLE} type
        LEVELS channel LIST
        LEVELS channel RESET

The LEVELS command allows fine control over the meaning of
the numeric access levels used for channels.  With this
command, you can define the access level required for most
of ChanServ's functions.  (The SET FOUNDER and SET PASSWORD
commands, as well as this command, are always restricted to
the channel founder.)

LEVELS SET allows the access level for a function or group of
functions to be changed.  LEVELS DISABLE (or DIS for short)
disables an automatic feature or disallows access to a
function by anyone other than the channel founder.
LEVELS LIST shows the current levels for each function or
group of functions.  LEVELS RESET resets the levels to the
default levels of a newly-created channel (see
HELP ACCESS LEVELS).

For a list of the features and functions whose levels can be
set, see HELP LEVELS DESC.

INFO

Syntax: /msg ChanServ INFO channel [ALL]

Lists information about the named registered channel,
including its founder, time of registration, last time
used, description, and mode lock, if any. If ALL is
specified, the entry message and successor will also
be displayed.

By default, the ALL option is limited to those with
founder access on the channel.

LIST

Syntax: /msg ChanServ LIST pattern

Lists all registered channels matching the given pattern.
(Channels with the PRIVATE option set are not listed.)

OP

Syntax: /msg ChanServ OP [#channel [nick]]

Ops a selected nick on a channel. If nick is not given,
it will op you. If channel and nick are not given,
it will op you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

DEOP

Syntax: /msg ChanServ DEOP [#channel [nick]]

Deops a selected nick on a channel. If nick is not given,
it will deop you. If channel and nick are not given,
it will deop you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

VOICE

Syntax: /msg ChanServ VOICE [#channel [nick]]

Voices a selected nick on a channel. If nick is not given,
it will voice you. If channel and nick are not given,
it will voice you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel, or to VOPs or those with level 3
and above for self voicing.

DEVOICE

Syntax: /msg ChanServ DEVOICE [#channel [nick]]

Devoices a selected nick on a channel. If nick is not given,
it will devoice you. If channel and nick are not given,
it will devoice you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel, or to VOPs or those with level 3
and above for self devoicing.

HALFOP

Syntax: /msg ChanServ HALFOP [#channel [nick]]

Halfops a selected nick on a channel. If nick is not given,
it will halfop you. If channel and nick are not given,
it will halfop you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs and those with level 5 access
and above on the channel, or to HOPs or those with level 4
and above for self halfopping.

DEHALFOP

Syntax: /msg ChanServ DEHALFOP [#channel [nick]]

Dehalfops a selected nick on a channel. If nick is not given,
it will dehalfop you. If channel and nick are not given,
it will dehalfop you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs and those with level 5 access
and above on the channel, or to HOPs or those with level 4
and above for self dehalfopping.

PROTECT

Syntax: /msg ChanServ PROTECT [#channel [nick]]

Protects a selected nick on a channel. If nick is not given,
it will protect you. If channel and nick are not given,
it will protect you on all channels you're on, provided you
have the rights to.

By default, limited to the founder, or to SOPs or those with
level 10 and above on the channel for self protecting.

DEPROTECT

Syntax: /msg ChanServ DEPROTECT [#channel [nick]]

Deprotects a selected nick on a channel. If nick is not given,
it will deprotect you. If channel and nick are not given,
it will deprotect you on all channels you're on, provided you
have the rights to.

By default, limited to the founder, or to SOPs or those with
level 10 and above on the channel for self deprotecting.

OWNER

Syntax: /msg ChanServ OWNER [#channel]

Gives you owner status on channel. If channel is not
given, it will give you owner status on all channels you're
on, provided you have the rights to.

Limited to those with founder access on the channel.

DEOWNER

Syntax: /msg ChanServ DEOWNER [#channel]

Removes your owner status on channel. If channel is
not given, it will remove your owner status on all channels
you're on, provided you have the rights to.

Limited to those with founder access on the channel.

INVITE

Syntax: /msg ChanServ INVITE channel

Tells ChanServ to invite you into the given channel.

By default, limited to AOPs or those with level 5 and above
on the channel.

UNBAN

Syntax: /msg ChanServ UNBAN channel

Tells ChanServ to remove all bans preventing you from
entering the given channel.

By default, limited to AOPs or those with level 5 and above
on the channel.

KICK

Syntax: /msg ChanServ KICK [#channel [nick [reason]]]

Kicks a selected nick on a channel. If nick is not given,
it will kick you. If channel and nick are not given,
it will kick you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

BAN

Syntax: /msg ChanServ BAN [#channel [nick [reason]]]

Bans a selected nick on a channel. If nick is not given,
it will ban you. If channel and nick are not given,
it will ban you on all channels you're on, provided you
have the rights to.

By default, limited to AOPs or those with level 5 access
and above on the channel.

TOPIC

Syntax: /msg ChanServ TOPIC channel [topic]

Causes ChanServ to set the channel topic to the one
specified. If topic is not given, then an empty topic
is set. This command is most useful in conjunction
with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK
for more information.

By default, limited to those with founder access on the
channel.

CLEAR

Syntax: /msg ChanServ CLEAR channel what

Tells ChanServ to clear certain settings on a channel.  what
can be any of the following:

     MODES    Resets all modes on the channel (i.e. clears
                  modes i,k,l,m,n,p,s,t).
     BANS     Clears all bans on the channel.
     EXCEPTS  Clears all excepts on the channel.
     OPS      Removes channel-operator status (mode +o) from
                  all channel operators.
     HOPS     Removes channel-halfoperator status (mode +h) from
                  all channel halfoperators, if supported.
     VOICES   Removes "voice" status (mode +v) from anyone
                  with that mode set.
     USERS    Removes (kicks) all users from the channel.

By default, limited to those with founder access on the
channel.

GETKEY

Syntax: /msg ChanServ GETKEY channel

Returns the key of the given channel. This is a command
mainly intended to be used by bots and/or scripts, so
the output is in the following way:

KEY  

key is "NO KEY" if no key is set.

SENDPASS

Syntax: /msg ChanServ SENDPASS channel

Send the password of the given channel to the e-mail address
set in the founder's nickname record. This command is really
useful to deal with lost passwords.

May be limited to IRC operators on certain networks.

This command is unavailable when encryption is enabled.

SERVADMIN HELP

The following commands are available to Services admins:

    GETPASS    Retrieve the founder password for a channel
                   (only if encryption is disabled)
    FORBID     Prevent a channel from being used
    SUSPEND    Prevent a channel from being used preserving
                   channel data and settings.
    UNSUSPEND  Releases a suspended channel.
    STATUS     Returns the current access level of a user
                   on a channel

Services admins can also drop any channel without needing
to identify via password, and may view the access, AKICK,
and level setting lists for any channel.

SERVADMIN LOGOUT

Syntax: /msg ChanServ LOGOUT channel [nickname]

This command will log the selected nickname out meaning they
would have to reidentify themselves to regain their access.

If you are the founder of the channel, you can log out anybody,
else you can only log out yourself.

If you are a Services admin, you can log out
anybody of any channel without having to be the founder
of the channel. Also, you can omit the nickname parameter;
this will log out all identified users from the channel.

SERVADMIN DROP

Syntax: /msg ChanServ DROP channel

Unregisters the named channel.  Only Services admins
can drop a channel for which they have not identified.

SERVADMIN SET

Services admins can also set the option NOEXPIRE, with
which channels can be prevented from expiring.
Additionally, Services admins can set options for any
channel without identifying by password for the channel.

SERVADMIN SET NOEXPIRE

Syntax: /msg ChanServ SET channel NOEXPIRE {ON | OFF}

Sets whether the given channel will expire.  Setting this
to ON prevents the channel from expiring.

Limited to Services admins.

SERVADMIN INFO

Services admins can use the ALL parameter with any channel.

SERVADMIN LIST

Syntax: /msg ChanServ LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE]

Lists all registered channels matching the given pattern.
Channels with the PRIVATE option set will only be displayed
to Services admins. Channels with the NOEXPIRE option set
will have a ! appended to the channel name for Services admins.

If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only
channels which, respectively, are FORBIDden, SUSPENDed or have
the NOEXPIRE flag set will be displayed.  If both options are
given, both types of channels will be displayed. These options are
limited to Services admins.

SERVADMIN GETPASS

Syntax: /msg ChanServ GETPASS channel

Returns the password for the given channel.  Note that
whenever this command is used, a message including the
person who issued the command and the channel it was used
on will be logged and sent out as a WALLOPS/GLOBOPS.

Limited to Services admins.

SERVADMIN FORBID

Syntax: /msg ChanServ FORBID channel [reason]

Disallows anyone from registering or using the given
channel.  May be cancelled by dropping the channel.

Reason may be required on certain networks.

Limited to Services admins.

SERVADMIN SUSPEND

Syntax: /msg ChanServ SUSPEND channel [reason]

Disallows anyone from registering or using the given
channel.  May be cancelled by using the UNSUSPEND
command to preserve all previous channel data/settings.

Reason may be required on certain networks.

Limited to Services admins.

SERVADMIN UNSUSPEND

Syntax: /msg ChanServ UNSUSPEND channel

Releases a suspended channel. All data and settings
are preserved from before the suspension.

Limited to Services admins.

SERVADMIN STATUS

Syntax: /msg ChanServ STATUS channel nickname

Returns the current access level of the given nick on the
given channel.  The reply is of the form:

    STATUS channel nickname access-level

If an error occurs, the reply will be in the form:

    STATUS ERROR error-message

Limited to Services admins.

MemoServ

HELP

MemoServ is a utility allowing IRC users to send short
messages to other IRC users, whether they are online at
the time or not, or to channels(*).  Both the sender's
nickname and the target nickname or channel must be
registered in order to send a memo.
MemoServ's commands include:
    SEND   Send a memo to a nick or channel
    CANCEL Cancel last memo you sent
    LIST   List your memos
    READ   Read a memo or memos
    DEL    Delete a memo or memos
    SET    Set options related to memos
    INFO   Displays information about your memos
    RSEND  Sends a memo and requests a read receipt
    CHECK  Checks if last memo to a nick was read

SEND

Syntax: /msg MemoServ SEND {nick | channel} memo-text

Sends the named nick or channel a memo containing
memo-text.  When sending to a nickname, the recipient will
receive a notice that he/she has a new memo.  The target
nickname/channel must be registered.

SENDALL

Syntax: /msg MemoServ SENDALL memo-text
Sends all registered users a memo containing memo-text.

CANCEL

Syntax: /msg MemoServ CANCEL {nick | channel}

Cancels the last memo you sent to the given nick or channel,
provided it has not been read at the time you use the command.

CHECK

Syntax: /msg MemoServ CHECK nick

Checks whether the _last_ memo you sent to nick has been read
or not. Note that this does only work with nicks, not with chans.

LIST

Syntax: /msg MemoServ LIST [channel] [list | NEW]

Lists any memos you currently have.  With NEW, lists only
new (unread) memos.  Unread memos are marked with a "*"
to the left of the memo number.  You can also specify a list
of numbers, as in the example below:
   LIST 2-5,7-9
      Lists memos numbered 2 through 5 and 7 through 9.

READ

Syntax: /msg MemoServ READ [channel] {num | list | LAST | NEW}

Sends you the text of the memos specified.  If LAST is
given, sends you the memo you most recently received.  If
NEW is given, sends you all of your new memos.  Otherwise,
sends you memo number num.  You can also give a list of
numbers, as in this example:

   READ 2-5,7-9
      Displays memos numbered 2 through 5 and 7 through 9.

RSEND

Syntax: /msg MemoServ RSEND {nick | channel} memo-text

Sends the named nick or channel a memo containing
memo-text.  When sending to a nickname, the recipient will
receive a notice that he/she has a new memo.  The target
nickname/channel must be registered.
Once the memo is read by its recipient, an automatic notification
memo will be sent to the sender informing him/her that the memo
has been read.

DEL

Syntax: /msg MemoServ DEL [channel] {num | list | LAST | ALL}

Deletes the specified memo or memos.  You can supply
multiple memo numbers or ranges of numbers instead of a
single number, as in the second example below.

If LAST is given, the last memo will be deleted.
If ALL is given, deletes all of your memos.

Examples:

   DEL 1
      Deletes your first memo.

   DEL 2-5,7-9
      Deletes memos numbered 2 through 5 and 7 through 9.

SET

Syntax: /msg MemoServ SET option parameters
Sets various memo options.  option can be one of:

    NOTIFY      Changes when you will be notified about
                    new memos (only for nicknames)
    LIMIT       Sets the maximum number of memos you can
                    receive

Type /msg MemoServ HELP SET option for more information
on a specific option.

SET NOTIFY

Syntax: /msg MemoServ SET NOTIFY {ON | LOGON | NEW | OFF}
Changes when you will be notified about new memos:

    ON      You will be notified of memos when you log on,
               when you unset /AWAY, and when they are sent
               to you.
    LOGON   You will only be notified of memos when you log
               on or when you unset /AWAY.
    NEW     You will only be notified of memos when they
               are sent to you.
    OFF     You will not receive any notification of memos.

ON is essentially LOGON and NEW combined.

SET LIMIT

Syntax: /msg MemoServ SET LIMIT [channel] limit

Sets the maximum number of memos you (or the given channel)
are allowed to have. If you set this to 0, no one will be
able to send any memos to you.  However, you cannot set
this any higher than .

INFO

Syntax: /msg MemoServ INFO [channel]

Displays information on the number of memos you have, how
many of them are unread, and how many total memos you can
receive.  With a parameter, displays the same information
for the given channel.

STAFF

Syntax: /msg MemoServ STAFF memo-text
Sends all services staff a memo containing memo-text.
Note: If you have opers on both the oper list and the
admin list they will receive the memo twice.  The same
applies for oper's on the Root list as well as other
lists.

SERVADMIN SET LIMIT

Syntax: /msg MemoServ SET LIMIT [user | channel] {limit | NONE} [HARD]

Sets the maximum number of memos a user or channel is
allowed to have.  Setting the limit to 0 prevents the user
from receiving any memos; setting it to NONE allows the
user to receive and keep as many memos as they want.  If
you do not give a nickname or channel, your own limit is
set.

Adding HARD prevents the user from changing the limit.  Not
adding HARD has the opposite effect, allowing the user to
change the limit (even if a previous limit was set with
HARD).
This use of the SET LIMIT command is limited to Services
admins.  Other users may only enter a limit for themselves
or a channel on which they have such privileges, may not
remove their limit, may not set a limit above , and may
not set a hard limit.

SERVADMIN INFO

Syntax: /msg MemoServ INFO [nick | channel]
Without a parameter, displays information on the number of
memos you have, how many of them are unread, and how many
total memos you can receive.

With a channel parameter, displays the same information for
the given channel.

With a nickname parameter, displays the same information
for the given nickname.  This use limited to Services
admins.